How to Restring an Acoustic Guitar

RESTRING AN ACOUSTIC GUITAR

Guitars basically are of three types: Classical guitar, Acoustic Guitar and Electrical Guitar. Classical guitar has nylon strings, Acoustic guitar has steel strings and electric guitar has magnetic pickups. 

However, for beginners learning from Acoustic Guitar is the best option. Acoustic means producing sound through mechanical waves and not electrically.

To know more about budget guitar check this site https://bestguitarunder.com/

Why do we need to restring the guitar?

We need to restring the guitar when the strings don’t work their usual. The guitar owner will come to know of this if he pays better attention to the instrument. There are some signs which let u know when to change guitar strings. They are

  • There are tuning issues. They come either when guitar strings are very new or very old. When they are new you can solve the problem by stretching them.  When they are old they don’t play the tune correctly, hence the change is required.
  • The tune of the strings, when new, is sharp. With time they tend to grow subtle. It depends on the guitarist how they like it, sharp or mellowed. But either way, the string needs to be changed before the sound becomes dull.
  • When we continuously play guitar the oil from our fingers collides with the strings and the strings get discolored due to this corrosion. This can lead to breakage too. So when you see the strings getting discolored from the original you have bought its time to change them.
  • When you get a new guitar the strings are flexible. But with time and usage, they become hard. This does not mean that they will break but it affects the sound of the music generating from them. So it’s time to change the strings.
  • The string of a new guitar is very smooth, almost slippery. With the usage and the corrosion the friction between your strings and fingers increases which indicates the dirt on the strings hence deteriorating the quality of strings.

How to change the strings?

After knowing when to change the strings it is necessary to know how to change them. The guitarist has to follow a few simple steps

  • Firstly, remove the strings from the tuning pegs.
  • Then, at the other end remove the bridge pins. If the pins are tight you may need Bridge Pin Puller.
  • After this remove strings from the hole and make sure you remember which hole held the thickest string. Keep all the bridge pins safely.
  • Now it’s time to polish and clean the guitar as it’s easier to clean it without the strings.
  • Now is the time to place new strings. We start with the ball end. Make a 45 degree turn and put them in the hone. Put the thickest string in the hole from which you have taken the thickest string out.
  • Now put the bridge pins in the hole and fix the strings into it. Do not push the pins too hard and do not use glue to fix it.
  • Now do the same with the remaining strings from thickest to thinnest.
  • After this, gently pull one string to the head of the guitar and through the hole of the tuning peg. Now pass the string around the back of the peg under itself and fold the end over the top of it.
  • Turn the machine head anti-clockwise slightly to tighten. Cut the remaining length with wire cutters.
  • Repeat the same with the remaining strings from thickest to thinnest and the guitar is ready to use.

Summary

Always change all the strings at a time to get an even tone from the guitar. Also, if you are regularly using the guitar make sure to change the strings in a month or two.

Leave a Reply

Your email address will not be published. Required fields are marked *